Choose the best cordless horse clipper or not?

Are you wonder to choose the best cordless horse clipper or not? With this article, I will explain when you should choose cordless and when not. Let's read now!

How to choose the best horse clippers?

If you have an idea of choosing the clipper from our products above, don’t miss some crucial elements below to support you better.

Blades

An equine clipper comes with two blades, including the “comb” for the lower and the “cutter” on the top.

The comb feeds the hair through while the cutter cuts every hair. Depending on the cut’s purposes, you need to choose a suitable blade.

For instance, if you live in a warmer climate, your horses need a closer cut. In case you live in a cold environment, you need to leave a little longer hair to keep them warm.

Also, you should consider the ease of changing the blades.

If your clipper has the adjustable blade, it’s easy to move the cutter further or close to the comb. Or in case the blade is detachable, you can easily remove it.

To fixed-blade models, you need to do a bit more manual work to change the blades. Even some models only use a single blade size.

Construction

The horse clippers should be well-built and made of durable materials because they are intended for heavy-duty use.

We suggest buying the products that are made of aluminum or other metal without plastic parts.

However, be sure that it must be easy to grip and doesn’t create any fatigue in your hands while grooming in a long time.

Size

Usually, the cordless horse clipper is much larger and can be a bit hard to handle. Meanwhile, the corded one is small because it doesn’t leave a slot for the batteries.

But the size of the clipper mainly depends on your agenda.

For example, if you are going to clip delicate areas of the horse like his neck and face, you need to opt for a small corded model.

Motor type

There are three main kinds of the motor that are used to supply the power including rotary, pivot, and magnetic.

• Rotary motors are common. They work with the support of an electric part and a rotating disc. By using electricity, the disc will rotate and offer power to the blades. And you can control different speed levels via a switch.
• Pivoting motors include a magnet and only one hand. Since the magnet is fixed, you have the blades and hands moving. And people often risk pulling off the furs while using them.
• Magnet motors come with a magnetic field and a direct drive shaft. Unlike the pivoting motor, the magnet field here can regulate the blades back and forth. So, it’s helpful for small jobs as well as heavy-duty clipping.

A quick guide to clip your equine

Step 1

Beginning in a non-sensitive area is the first and foremost thing. When moving the clipper to a part of the horse’s body, avoid touching ticklish places first such as his sides or neck.

Step 2

The next thing is to turn the clipper on away from the horse’s body and let it run for some seconds.

Then start clipping by moving in the direction opposite of hair development. Try to clip lines straight and get rid of entire patches before moving onto other parts.

Additionally, you should notice the corners of the clipper to ensure you don’t poke your horse.

Step 3

Continue clipping out long and narrow parts to obtain the evenest results. Then overlap every new strip of hair to prevent any uneven patches.

And when reaching a whorl in the coat, you should clip out the hair from other angles to remove it all.

Step 4

Some parts of your equines might still have hair if you don’t perform a full clip. Hence, you need to avail a pair of cutting shears to trim down any remaining hair, typically surrounding the legs.

Step 5

After finishing the job, you need to sweep and remove the hair left on the ground.

Since it doesn’t decompose, avoid putting in a compost pile. Instead, you should toss it out with the regular garbage.

Step 6

Finally, you need to blanket your horses because they aren’t used to the temperature change as a result of having less hair.

If they have a thin coat, simply put a light blanket on them. Or in case the weather becomes cold, make sure to give them a thick winter blanket.

>>> Check now: Top 5 best horse blankets on the Market

Pro tips

• The clipper often heats up while using. So, you need to keep it cool with cooling fluid. Or turn it off and let it cool if necessary.
• Don’t clip too early, mid-spring or late in the year because this might interfere with the development of the horse’s coat in summer.
• Avoid clipping the day before horse shows or competition. Usually, the clipped hair needs 5 to 14 days or more to turn back to its dazzling state.
• If you are planning to clip near the tail and mane, make sure to wrap them and clip to the side to avoid cutting any long hairs. Or you can ask your friend or anyone to hold both to the side so that you can do with ease.
• In case you need to clip your horse’s face or any sensitive area, please leave it for last. And make sure you use the smaller clipper to perform.

What is your choice after all?

With top 5 best horse clippers above, we highly suggest the Andis AGC Super 2-Speed.

This product boasts an excellent two-speed rotary motor for those who want to perform pro grooming. Since it operates quietly, it’s convenient to use on the sensitive horses.

Importantly, it’s made by a popular brand, so you’re guaranteed to get the best result.

GET YOURS TODAY if you agree with us, guys!

Or in case you want to add more tools to groom your equines, you can consult one more post of the best horse grooming kit.

And don’t mind leaving your comments below to study anything related to this topic! We’d love to support you!